EUROPEAN STEEL AND ALLOY GRADES (OLD VERSION)

NEW!   Welcome to   STEELNUMBER.COM,   an improved version of this site
Home Steel and Alloy Standard Search Equivalent Grades Russian Grades About us
YOU HERE:   Steel and Alloy   ->   Number 1.40XX           OR           Standart   ->   EN 10088   /   EN 10088

X46Cr13   ( 1.4034 )



    Grade :     X46Cr13
    Number:     1.4034
    Standard: EN 10088 - 2 : 2005   Stainless steels. Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
EN 10088 - 3 : 2005   Stainless steels. Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
    Classification:     Martensitic stainless steels - standard grade
    Equivalent grades:     Go here


Chemical composition % of the ladle analysis   of grade   X46Cr13 (1.4034)
Tighter carbon ranges may be agreed at the time of enquery and order
Particular ranges of sulphur content may provide improvement of particular properties. For machinability a controlled sulphur content of 0.015 % to 0.030% is recommended and permitted. For weldability, a controlled sulphur content of 0.008 % to 0.030 % is recommended and permitted. For polishability, a controlled sulphur content of 0.015 % max is recommended.
Elements not listed in this table shall not be intentionally added to the steel without the agreement of the purchaser except for finishing the cast.
C Si Mn P S Cr
0.43 - 0.5max   1max   1max   0.04max   0.01512.5 - 14.5


Equivalent grades of grade   X46Cr13 (1.4034)
Poland
PN		Russia
GOST
4H13
40KH13


Mechanical properties
Mechanische Eigenschaften
Caracteristiques mecaniques
ReH Minimum yield strength / Mindestwert der oberen Streckgrenze / Limite d’elasticite minimale
Rm Tensile strength / Zugfestigkeit / Resistance a la traction
A Minimum elongation / Mindestwert der Bruchdehnung / Allongement minimal
J Notch impact test / Kerbschlagbiegeversuch / Essai de flexion par choc

These comparison tables are only intended as an indication of the closest khown equivalent grades.
The source standarts should always be checked for the specific purpose for each material, in case of doubt

DATABASE IS UNDER CONSTRUCTION
©   2010 - 2013   All rights reserved.      The contents from this site may not be reproduced.
The entire risk as to use of these content is assumed by you the user